Yearly HVAC Maintenance Guidelines

As soon as the air turns chilly, you know it’s time to get your home ready for the cooler months ahead. Your heating system is critical to maintaining a cozy, warm environment. A well-maintained furnace provides the comfort you crave while using a smaller amount of energy. Routine inspections also make your system less likely to fail and help extend its life span. These are just a couple of examples of how annual HVAC maintenance can save you time, money and stress. Here’s what ought to be on your checklist before winter appears.

Schedule HVAC Maintenance

To keep your home heating system in peak condition, consider arranging furnace maintenance annually. The preferred time to schedule this is in the fall before contractors become swamped with calls during the busy cold months. Having said that, if you miss that window on the calendar, it’s still helpful to schedule furnace maintenance no matter what the season.

Your technician’s HVAC maintenance checklist should feature the following:

• Examine the thermostat settings: We all desire an efficient HVAC system, and this includes your thermostat. During a maintenance tune-up, the professional ensures your thermostat is reading the temperature accurately and engaging your furnace at the proper times.
• Tighten the electrical connections: Verifying that all electrical connections are secure is essential. Loose wires can create a higher electricity draw, potentially reducing the life of your system’s components and creating a safety hazard.
• Measure the motor voltage and current: This step allows a contractor to find out if the motor is performing within the desired parameters, helping to protect against motor failure and unnecessary energy consumption.
• Lubricate moving elements: Friction has a negative effect on energy efficiency. Your technician lubricates all moving parts to minimize resistance, reduce wear and tear, and lower your energy bills.
• Check the condensate drain: Air conditioners, condensing furnaces and whole-house humidifiers send condensate down a drain as they operate. This line needs to be clear of obstructions to protect against water accumulation and potential home damage. Inspecting the drain provides peace of mind that your utility closet won’t be damaged.
• Test the system controls: This involves verifying the furnace starts, operates and powers off according to the manufacturer’s specifications, ensuring safety and dependability.
• Inspect the ignition burner assembly: This component is responsible for igniting the burner. A professional examines the assembly to make sure it’s clean and operating effectively.
• Examine the heat exchanger: The heat exchanger transfers heat from the fuel to your home’s air. A crack could release carbon monoxide into your dwelling, so careful examination is an important step on the HVAC maintenance visit.
• Clean the burners: In time, burners can get covered in dust and debris that reduces performance. A comprehensive cleaning assures they operate efficiently and safely.
• Look for gas leaks: Searching for leaks is fundamental with gas heating systems. A leak can be deadly and should be addressed ASAP.
• Analyze the gas pressure: Proper gas pressure is essential for optimal furnace operation. Pressure that’s too low or too high can impact system efficiency and the temperature inside your residence.

Maintenance Steps You Can Do Yourself

Here’s how to keep your furnace operating efficiently between professional HVAC maintenance visits:

• Change your air filter: A plugged filter can put stress on your home’s HVAC equipment. Examine the filter every 30 days and exchange it when it appears dirty to improve efficiency and extend your system’s life span.
• Look at your thermostat settings: The Department of Energy (DOE) recommends setting your thermostat between 68 and 70 degrees when you’re inside the home and awake in the winter. Then, set the temperature back 7 to 10 degrees while you’re away all day or going to be asleep at night to save up to 10% on your heating spending.
• Clean the air registers: Dust accumulation can reduce airflow, so vacuum the grilles regularly to preserve good air quality. Next, make sure furniture, rugs and curtains don’t block your return or supply vents to ensure proper system balance.
• Reverse the ceiling fan: Set your ceiling fans to spin clockwise during the colder months to push warm air down from the ceiling closer to the floor.
• Seal drafts: Inspect your home for leaky windows and doors. If you sense drafts, seal them with caulk and weatherstripping to keep the cold air out and minimize your furnace’s workload.
• Evaluate your attic insulation level: An attic without enough insulation results in heat loss. Add insulation if it’s needed to keep heat indoors and lower your energy costs.

Call Service Experts Heating, Air Conditioning & Plumbing for HVAC Maintenance in the U.S.

Service Experts Heating, Air Conditioning & Plumbing is happy to solve your home heating and cooling needs. We give you peace of mind with our thorough HVAC inspections, fast solutions and a 100% satisfaction guarantee. Our ACE-certified technicians make sure they go above and beyond. You can rely on Service Experts Heating, Air Conditioning & Plumbing to make a real difference in your comfort and residential relaxation this winter with furnace maintenance in Service Experts Heating, Air Conditioning & Plumbing. Call 866-397-3787 today for help {fortifying your home against|getting your home ready for|preparing your residen